Environmental System

Characteristics

•   Unique system supplier with ISO9001&14001, OHSAS18001 Certification
•   Complete air pollution control system supplier for fabric filter, scrubber , rotor &
    oxidizer, carbon tower etc.
•  The solid electrodes virtually eliminate maintenance, since there are no broken
    wires to replace.
•   Wider spacing, along with tubular configuration, greatly lessens sparking and
    shorting of cells. Therefore, this design will effectively abate process exhaust which
    contains high concentration of particulate. Lower pressure drops (0.25 in. w.g. vs.  
    6-10 in. w.g.) and the elimination of broken or blinded bags makes this precipitator
    design highly desirable in lieu of fabric collectors.
•   Wider tube spacing also enables the precipitator to operate continuously or
    intermittently wet.
•   Re-entrainment problems due to highly resistive or highly conductive materials
    have been eliminated by operating the precipitator wet. As soon as the particle
    adheres, it is swept away.
•   Because of its “insensitivity to wetness”, the precipitator can be installed down
    stream from existing wet scrubbers, bringing these scrubbers into compliance with 
    today’s more stringent codes.
•   ACTIVE can supply an optional scrubber (or carbon bed) in combination with the
    precipitator. This will enable the system to control gaseous as well as particulate
    emission.
•   Automatic voltage control can optimize the system performance